Kapro Prolaser 3D All Lines Green 8832G Manual Del Usuario página 11

Working in Manual mode:
In manual mode the 8832G self-leveling mechanism is disabled
and the laser can be set at any required slope.
The laser beams will flash every 2 seconds to indicate that the
laser is in Manual mode.
1. In OFF mode, press the Manual mode button (d) for 2 seconds.
The Manual mode red LED indicator (d) will turn on.
The bottom horizontal beam and its LED indicator will turn on.
2. Select the required laser beams.
3. To mark a slope, tilt the laser to the desired angle.
4. To return to self-leveling mode, push the POWER switch to ON.
The laser will return to Automatic mode and the Manual mode
LED indicator will turn off.
Make sure you are within the self-leveling range before activating
the automatic mode.
11