Motorola Solutions IMPRES 2 Guia Del Usuario página 17

This process can take up to 12 hours or more to complete, depending on the state of charge and capacity of
the battery. Interruption of either phase delays initialization until the next charging opportunity.
3.3
IMPRES 2 or IMPRES Pocket-to-Pocket
When charging IMPRES 2 or IMPRES batteries, the IMPRES 2 or IMPRES charger records charging
information within battery memory.
If the IMPRES 2 or IMPRES battery is removed from one IMPRES 2 or IMPRES charger pocket and, within
30 minutes, inserted into another or the same IMPRES 2 or IMPRES charger pocket, then charging resumes
at the point where charging was interrupted.
This feature prevents battery overcharging and minimizes the loss of cycle life. This is especially important
when charging Nickel batteries.
3.4
Automatic IMPRES 2 or IMPRES Calibration and
Recondition
The IMPRES 2 charger automatically assesses the condition of an IMPRES 2 or IMPRES battery. Based on
this condition, the charger automatically calibrates or reconditions the battery.
Interruption of either the discharge phase or the full charge phase delays calibration until the next charging
opportunity.
Use Charger Setup mode to enable or disable calibration or reconditioning. When you disable calibration and
reconditioning, but the IMPRES 2 or IMPRES battery requires calibration or reconditioning, the LED flashes
alternating amber and green at battery insertion and after the battery is charged.
NOTE: The IMPRES 2 or IMPRES battery must be outside an IMPRES 2 or IMPRES charger pocket
for more than 30 minutes for automatic calibration or reconditioning.
3.5
IMPRES Battery with Self-Calibration and
Recondition
ATTENTION: IMPRES 2 batteries that have
calibration and reconditioning when docked into this IMPRES 2 charger (with software version 2.05 or
newer).
NOTE: Ensure that your charger is always updated with the latest firmware. You can download the MSI
Charger Reprogrammer application package from Motorola Online (MOL) or Motorola Solutions
website.
Chapter 3: IMPRES 2 and IMPRES Batteries and Chargers
icon on the battery label do not require periodic
MN002407A01-AK
17