Motorola Solutions IMPRES 2 Guia Del Usuario página 33

Status
Battery Detected
Rapid Discharging
Rapid Charging
Long-Term Storage Complete
Fault
● Battery is not making
proper electrical contact
with the charger.
● Battery is not an IMPRES
2 or IMPRES battery.
● An unknown condition
is preventing the battery
from being discharged.
● Charging is completed be-
fore the Long-Term Stor-
age goal is reached.
● The charger pocket is a
special type.
Standby
● Battery is waiting to rapid
charge.
● Battery is too hot, too
cold, or low voltage.
● Charger is too hot
Charger Display
IMPRES 2
BATTERYOR
IMPRES
BATTERY
STORAGE DISCHRGE
xxx% Rated Cap
STORAGE CHARGE
xxx% Rated Cap
LONGTERM STORAGE
xxx% Rated Cap
WARNING:
NOT CHARGEABLE
REMOVE & REINSERT
OR
WRONG BATT TYPE
CANNOT LT STORE
OR
CANNOT DISCHARGE
FOR LT STORAGE
OR
STORE INCOMPLETE
Low Capacity:yy%
OR
RADIO POCKET
CANNOT LT STORE
OR
CHARGING POCKET
CANNOT LT STORE
WARNING:
HOT BATTERY
WAITING TO CHRGE
OR
COLD BATTERY
WAITING TO CHRGE
OR
VERY LOW BATTERY
WAITING TO CHRGE
MN002407A01-AK
Chapter 5: Charging Indication
LED Indicator
Battery requires Calibration:
Alternating amber and green
for four seconds.
Steady amber
Steady red
Alternating amber and green
Flashing red
Flashing amber
33