Motorola Solutions IMPRES 2 Guia Del Usuario página 39

Table 18: Status Indications of a Lithium-Ion Battery Prepared for Shipment (IMPRES 2 or IMPRES
Battery Calibrated, Must Charge)
Status
Charger Powers On
Battery Detected
Rapid Charging
Ship Lithium Complete
Fault
● Battery is not making
proper electrical contact
with the charger.
● Battery is unknown or
Nickel.
● An unknown condition
is preventing the battery
from being discharged.
● Charging is completed be-
fore the Ship Lithium goal
is reached.
● The charger pocket is a
special type.
Standby
● Battery is waiting to rapid
charge.
● Battery is too hot, too
cold, or low voltage.
● Charger is too hot.
Charger Display
IMPRES 2
CHARGER
IMPRES 2
BATTERY
OR
IMPRES
BATTERY
SHIP LI CHARGE
xxx% Rated Cap
LI READY TO SHIP
xxx% Rated Cap
WARNING:
NOT CHARGEABLE
REMOVE & REINSERT
OR
WRONG BATT TYPE
CANNOT SHIP LI
OR
CANNOT DISCHRGE
FOR LI SHIPMENT
OR
SHIP INCOMPLETE
Low Capacity:yy%
OR
RADIO POCKET
CANNOT SHIP LI
OR
CHARGING POCKET
CANNOT SHIP LI
WARNING:
HOT BATTERY
WAITING TO CHRGE
OR
COLD BATTERY
WAITING TO CHRGE
OR
Chapter 6: Preparation for Lithium-Ion Battery Shipment
LED Indicator
Green for approximately 1 sec-
ond
Steady red
Steady red
Steady green
Flashing red
Flashing amber
MN002407A01-AK
39