VALBERG CNF 338 C W625C Instrucciones De Uso página 12

B
• Remove the upper left hinge cover and upper left hinge from the accessory bag. Place
the refrigerated door body on the middle hinge and install the upper left hinge. Connect
the refrigerator top signal line
2
line to the signal line
of the box body.
Note: The two terminals
screen on the door will not display due to the circuit out of power.
NOTE:
When replacing the hinge decorative cover to the right side
of the box body, the two inserts on the hinge decorative
cover (as shown in the f gure) shall be cut off.
The picture above is only for reference. The actual configuration will depend on the
physical product or statement by the distributor.
Changing the Light
This product contains a light source of energy efficiency class G.
•
Light source in this product can only be replaced by qualified professionals.
•
Please contact after-sales service if the light source fails.
•
The light source shall be removed at the end of the product's useful life, with sorting
•
and recycling done separately.
Using the appliance
4
to the door body signal line
3
. Finally, replace the hinge decorative cover to the right side
2 3
and
4
upper hinge
11
must be connected, otherwise the display control
upper hinge cover
decorative cover
3
2
1
EN
1
, and connect the signal
inserts