Publicidad
Idiomas disponibles
Idiomas disponibles
B
Starting
•
After transportation, please let the product stay for more than 2 hours before turning on the
power, otherwise it will lead to a decrease in cooling capacity or a damage to the product.
•
Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or
for above 4 hours in summer when the ambient temperature is high.
•
Please pull out the plug in case of power failure or cleaning. Do not connect the freezer to
power supply within five minutes to prevent damages to the compressor due to successive
starts.
Energy saving tips
•
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
•
Let hot foods cool to room temperature before placing in the appliance. Overloading the
appliance forces the compressor to run longer. Foods that freeze too slowly may lose
quality, or spoil.
•
Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
•
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
•
Liners interfere with cold air circulation, making the appliance less efficient.
•
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible
Using the appliance
1. Please take out
the plug before
removal.
3. Take down the
lamp panel.
12
EN
2. Remove the
lampshade with a
screwdriver.
4. Remove the
connection terminal.
Publicidad
