Publicidad
ENGLISH
Even if the equipment has all its safety devices,
if necessary, during the installation and connec-
tion other safety devices may be supplemented
in accordance with applicable laws.
Safety thermostat with automatic reset:
A)
cuts off the mains electricity supply to the
plate zone heating element in case of plate
overheating. Once the cause has been elimi-
nated and temperature is reduced, operation
is restored automatically.
Safety thermostat: cuts off the electricity
B)
supply to the oven in case of overheating.
WARNING: There are no indicator de-
vices to signal the tripping of the automatic
reset thermostat.
The illustration shows the position of the si-
gns provided.
Nameplate with manufacturer and ap-
A)
pliance data.
WARNING:read the manual careful-
B)
ly before carrying out any procedure.
WARNING: When washing the ap-
C)
pliance, do not point pressurised water and/
or steam jets at internal parts.
WARNING: all relevant regulations
D)
must be complied with. "Install in complian-
ce with the relevant regulations and use in
well ventilated premises only".
WARNING: all relevant regulations
E)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instruc-
tions".
WARNING: watch out for hot surfa-
F)
ces.
4
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
A
E
D
F
37M3202
C
B
CE marking: this indicates that the equip-
G)
ment is compliant with all relevant laws ap-
plicable to the product.
WEEE symbol: indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
SAFETY
B
A
H
3326541_ut_GB_rev.1
G
Publicidad
