Publicidad
Idiomas disponibles
Idiomas disponibles
6.1 Adjusting the water softener
German
French
degrees
degrees
(°dH)
47 - 50
84 - 90
43 - 46
76 - 83
37 - 42
65 - 75
29 - 36
51 - 64
23 - 28
40 - 50
19 - 22
33 - 39
15 - 18
26 - 32
11 - 14
19 - 25
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the
water softener
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a programme".
2. Press and hold, at the same time,
button
and button
indicators of buttons
start to flash.
3.
Press button
• The indicators of buttons
go off.
Water hardness
mmol/l
(°fH)
8.4. - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
7 - 18
0.7 - 1.8
< 7
< 0.7
until the
,
and
.
and
Clarke
degrees
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
•
The indicator of button
tinues to flash.
• The acoustic signals operate, e.g.
five intermittent acoustic signals =
level 5.
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4.
Press button
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
ENGLISH
9
Water softener
adjustment
Level
10
9
8
7
6
1)
5
4
3
2
2)
1
con-
again and again to
Publicidad
