Connections; Power Connections; Connecting The Printer To A Wall Outlet - Sony UPX-DP10 Manual De Instrucciones

Connections

Power Connections

Connecting the printer to a wall outlet

Connecting the station to a wall outlet
36
Connect the station and the printer.
Notes
• Turn off the power of each device before attempting to make any
connections.
• Grab the connector at the end of the connecting cable, and firmly insert it
into the socket.
Connect the printer to wall outlet using the supplied AC power cord.
Printer
Power is supplied to the station from wall outlet via the PCS-AC80 AC
power adaptor (supplied). The station has no power switch so that
supplying power immediately begins when you connect the AC power
adaptor to the station and wall outlet.
1
Attach the ferrite filter (supplied) to the DC cord of the AC power
adaptor.
Release the lock of
Wrap the cord around
the ferrite filter with a
the filter once to hold it
screwdriver or a in place.
similar tool.
- AC IN
AC power cord
(supplied)
to wall outlet
DC cord