Calpeda NCE HQ2 Instrucciones De Uso página 30

GB
4.Technical Data
Voltage
Protection grade
Insulation class
Relative humidity
Max. ambient temperature
Temperature environment
Liquid temperature
System pressure
Pumps can withstand
the test pressure of EN
60335-2-51
Inlet pressure
Surface temperature
Attention
The actual inlet pressure plus the closing pressure of the pump should
always be lower than the maximum system pressure allowed by the pump.
Attention
The minimum relative inlet pressure applies to pumps installed at sea
level up to 300 m. For altitudes above 300 m, the required relative inlet
pressure must be increased by 0.01 bar for every 100 m of altitude.
1x230V±10%,50/60Hz,PE
IP44
Max 95%
0 ~ +40℃
TF110(EN60335-2-51)
2 ~ +110℃
10MPa
PN10:12MPa
Liquid temperature
75℃
95℃
110℃
The maximum. surface temperature
is not higher than 125°C
29
F
Min inlet pressure
0.01Mpa
0.05Mpa
0.1MPa