MBO Merkura 1040 Instrucciones Para El Servicio página 29

Merkura 1040 GB neu
Note
Setting
the clock
C
To correct
an entry
C
05.03.2003
SETTINGS
After setting the exercise zone, the clock-
setting mode is activated.
The clock-setting mode is activated as soon as
the exercise zones have been set (see NOTE
above).
Use button "B" to select either 12h- or 24h-
A
mode and confirm your choice with button "C".
The hour digits will start to flash. Use button "B"
to select die correct value, confirm the setting
with button "C". Repeat this process to set the
correct minutes.
After confirming with key "C" the setting is
complete. The heart rate monitor can now be
used.
B
You can change between timer and heart rate
with timer mode and heart rate with calorie mode
with key "A".
To correct an erroneous entry, keep keys "B"
and "C" pressed for about 2 sec., until all display
values appear, to make a reset and start the
entry again.
B
16:45 Uhr Seite 9
www.MBOservice.net
9