Midea MBO7NM30E0-X Manual De Instrucciones página 19

Remove The Telescopic Runners
( take the left side for example, same for right side)
• Lift up one end of the telescopic runners hard.
• Lift up the whole telescopic runners and remove backward.
1
Change The Power Cord
Position A show the terminal box position on the back of the back outer case and it's
closed.
Steps:
• cut off the power, use small flat screwdriver to open two snap 1 ,
• use Phillips crew driver to take off screws 3, 4, 5 and 6.
• change the new power cord, fix the yellow/green wire on 3, bro
wire on 5.
• twist screw 6 closed the terminal box cover finish the changing.
A
back outer case
2
brown {L}
yellow/green
power cord
blue {N}
EN-16
2.
wn wire on 4, blue
3 4
1 2
5
6
terminal box
EN