Publicidad
Idiomas disponibles
Idiomas disponibles
3. Instalation
3.1 Unpacking and Inspection
Before installation, please inspect the product. Be sure that nothing inside the package is
damaged. You should have received the following items inside of package: the
inverter/charger, user manual, battery cables and USB cable.
3.2 Preparation
Before connecting all wirings, please take off bottom cover by removing screws as
shown below.
3.3 Mounting the inverter/charger unit
Consider the following points before selecting where to install:
-
Do not install the inverter/charger on flammable building materials.
-
To ensure adequate air circulation, leave a space of about 200 mm on the side
and about 300 mm above the appliance.
-
To ensure the best operation, the ambient temperature should be between 0-50
°C.
-
Leave a little free space around the inverter, as shown in the image below, to
ensure adequate heat dissipation and enough space to move the cables.
46
Publicidad
