Publicidad
Idiomas disponibles
Idiomas disponibles
20
Battery stop
discharging
voltage when
mains is available
21
Battery stop
charging voltage
when mains is
available
22
Auto turn page
23
Backlight control
24
Alarm control
25
Beeps while
primary source is
interrupted
27
Record fault code
28
Solar power
balance: when
enabled, solar
input power will
be automatically
adjusted
according to
connected load
power.
29
Power saving
mode
enable/disable
30
Battery
equalization
31
Battery
equalization
voltage
Available options for 24V models:
Setting range is from 22.0V to 29.0V.
Increment of each click is 0.1V.
Available options for 48V models:
Setting range is from 44.0V to 58.0V.
Increment of each click is 0.1V.
Available options for 24V models:
Setting range is from 22.0V to 29.0V.
Increment of each click is 0.1V.
Available options for 48V models:
Setting range is from 44.0V to 58.0V.
Increment of each click is 0.1V.
If selected, the display screen will auto turn the
display page.
If selected, the display screen will stay at latest
page.
If selected, the solar input power will be
automatically
following formula: Max. Input solar power =
Max. battery charging power + Connected
load power when the machine in off mains
work state.
If selected, the solar input power will be the
same to max. battery charging power no
matter how much loads are connected. The
max. battery charging power will be based on
the setting current in program 11 (Max. solar
power = Max. battery charging power).
If disable, no matter connected load is low or
high, the on/off status of inverter output will not
be effected.
If enable, the output of inverter will be off when
connected load is pretty low or not detected.
Setting range is from 24.0V to 29.2V for 24V model and 48.0V to
58.4V for 48V model. Increment of each click is 0.1V.
59
adjusted
according
to
the
Publicidad
