Descargar Imprimir esta página

Num'axes PIE 1013 Manual De Instrucciones página 33

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

attempt to immerse the unit in water or any other liquid. This
will damage the unit and void the warranty.
Use a soft lens cloth for cleaning lens. Avoid touching the lens
with your fingers. Remove dirt or stains with a soft cloth
dampened with water or a neutral detergent. Keep your camera
in a dry and cool dust-free environment or container when it is
not used.
Take the batteries out when camera is not to be used over an
extended period of time.
Avoid dropping your camera on a hard surface.
Do not disassemble your camera.
Do not mix new and old batteries.
Do not open the camera for unauthorized service. This could
cause serious damage to the unit and will void the warranty.
NOTE: This camera is a precision electronic device. Do not
attempt to service this camera by yourself, as opening or
removing covers may expose you to dangerous voltage points
or other risks.
Definitions
Passive Infrared Sensor (PIR): detects the moving objects.
Microphone: picks up the sounds while video in recording.
Infrared LEDs: invisible light for night time capture (940 nm).
LCD display: displays the setting and camera status.
Camera Lens: captures the images/videos.
Battery Tray Releaser: press to release the battery tray.
Switch: has 5 different positions: TEST (settings) / OFF / Preset
setting A / Preset setting B / Manual setting MAN.
Red LED: indicates PIR detection coverage in Test mode and
indicates low battery.
USB Port: allows you to connect the camera to a PC using the
provided USB cable for captured image/video download.
[▲] UP and [▼] DOWN Buttons: allow you to change the mode
Indice A
33/144

Publicidad

loading