Num'axes PIE 1013 Manual De Instrucciones página 39

•
Press the UP [▲] or DOWN [▼] button to select PIR mode.
•
Press [M] to save your selection. The LCD screen indicates "PIR".
The words "CAM RES" or "VIDEO T" are blinking.
•
Press and hold the [M] button for 2 seconds to exit and come
back to the screen that indicates the status with the word "PIR".
•
Now, your camera will operate in PIR detection mode if you slide
the switch to the MAN position.
Setting the Image Resolution in PIR mode
Your camera can be programmed to 3 different image resolutions:
3 stars = 8MP / 2 stars = 5MP / 1 star = 2MP
•
Slide the switch to the TEST position from OFF, the status
display will show the camera current status.
•
Press the [M] button once to enter the programming mode.
•
The word "PIR" will be blinking, press [M] to confirm the
camera's operation is PIR detection.
•
Press the UP [▲] or DOWN [▼] button until the words "CAM"
and "RES" are blinking.
•
Press the [M] button once to enter the resolution setting.
•
Press the UP [▲] or DOWN [▼] button to select the desired
resolution.
•
Press [M] once to save your selection. The words "CAM" and
"burSt" (Burst shoot) will be blinking. Press the [M] button once
to enter the burst shoot setting or press and hold the [M]
button for 2 seconds to exit.
Setting the Burst Shoot in PIR mode
Your camera can be programmed to shoot 1 to 10 pictures per trigger.
•
Slide the switch to the TEST position from OFF, the status
display will show the camera current status.
•
Press the [M] button once to enter the programming mode.
•
The word "PIR" will be blinking, press [M] to confirm the
camera's operation is PIR detection.
Indice A 39/144