Makita DJR183 Manual De Instrucciones página 8

1
► 1 . Saw blade 2. Blade clamp sleeve
To remove the saw blade, rotate the blade clamp
sleeve in the direction of the arrow fully. The saw blade
is removed and the blade clamp sleeve is fixed at the
released position.
NOTE:
• If you remove the saw blade without rotating the
blade clamp sleeve fully, the sleeve may not be
fixed. In this case, rotate the blade clamp sleeve
fully, then make the sleeve fixed at the released
position.
For Model DJR185
3 4
► 1 . Hex wrench 2. Bolt 3. Loosen 4. Tighten
2
1
2
1
► 1 . Recipro saw blade 2. Hex wrench 3. Hole for
recipro saw blade 4. Blade clamp
To install the saw blade, loosen the bolt by hex wrench.
When installing a recipro saw blade, press the bolt with
the hex wrench to open the slot during inserting the
blade.
1
► 1 . Saw blade 2. Blade clamp 3. Hole for recipro saw
blade 4. Hole for jig saw blade
8 ENGLISH