KTM A59012955544 Instrucciones De Montaje página 42

5 ASSEMBLING THE FORK
5.1
Condition
The corresponding fork springs (not included) are required to fit the lowering kit.
Preliminary work
–
Remove the headlight mask with the headlight (see Owner's Manual/repair manual).
–
Raise the motorcycle using lift stand (see Owner's Manual/repair manual).
–
Remove the front wheel (see Owner's Manual/repair manual).
–
Remove the fork legs (see repair manual).
Disassembling the fork legs
The operations are the same on both fork legs.
–
–
8
Assembling the fork
Clamp the fork leg in the area of lower triple clamp in a vise.
Clamping stand (T1403S)
4
Loosen screw cap .
Ring wrench (T14017)
Info
The screw cap cannot be removed yet.
505241-01