KTM A59012955544 Instrucciones De Montaje página 55

–
Remove the special tool.
Support tool (T14026S1)
–
4
Mount screw cap .
Info
When assembling, ensure that the screw caps are mounted correctly.
Rebound damping side – right fork leg, screw cap with marking REB, red adjuster.
Compression damping side – left fork leg, screw cap with marking COMP, white adjuster.
–
Pull the spring downward.
–
Mount the open end wrench on the hexagonal part.
–
Hold the open end wrench and tighten screw cap
Guideline
Screw cover on the piston rod
Ring wrench (T14017)
4
.
M12x1
ASSEMBLING THE FORK 5
505242-01
25 Nm (18.4 lbf ft)
21