Descargar Imprimir esta página

Mx Onda MX-VC2644 Manual De Usuario E Instalacion página 53

Placa vitrocerámica para encastrar con tres zonas de cocción

Publicidad

Idiomas disponibles

Idiomas disponibles

3. When the power level of the large (triple) cooking zone
is flashing, each time you press button 5 the diameter
of the cooking zone will change; from small (A) to
medium (B) and large (C), when you press this button
again, the size of the cooking zone will return to the
small (A).
When you have finished cooking
1. To switch off a cooking zone, touch the selection
button 2 corresponding to the chosen cooking zone
and when the power indicator 3 of the selected cooking
zone is flashing, press and hold the switch off button
for three seconds cooking zone 6.
2. To completely turn off the hob, touch the on / off button
1 and all the cooking zones will turn off.
3. Beware of hot surfaces!
The symbol "H" indicates which cooking zone is hot to
the touch. It will disappear when the surface has
cooled to a safe temperature.
CONTROL PANEL LOCK
You can lock the control panel to prevent unintentional use (for example,
children accidentally turning on the cooking zones).
When the control panel is locked, all buttons except the on / off button 1 remain
disabled.
To lock the control panel
Touch the control panel lock button 7 and the timer indicator will show the
indication " Lo ".
To unlock the control panel
1. Touch and hold your finger on the lock button 7, until the indication " Lo "
disappears from the screen.
2. Now the control panel is unlocked and the board can be used.
11

Publicidad

loading