Mx Onda MX-VC2644 Manual De Usuario E Instalacion página 58

Under all circumstances, make sure that the ceramic hob is well ventilated and
that the air inlet and outlet are not blocked.
Make sure the ceramic hob is in good working order. As shown below
Note: The safety distance between the ceramic hob and the cabinet
or extractor hood above the ceramic hob must be at least 760 mm.
A(mm)
Before installing the ceramic hob, make sure that
The countertop surface is smooth and level, and no structural elements
interfere with space requirements
The hob is made of a heat-resistant material.
If the ceramic hob is installed above an oven, that the oven has a built-in
cooling fan.
The facility will comply with all authorization requirements and applicable
standards and regulations.
The electrical installation complies with local safety rules and regulations
and incorporates a suitable isolation switch or circuit breaker that provides
a total disconnection from the electrical network.
The isolating switch or circuit breaker must be adequate and provide a
3 mm air gap contact separation on all poles (or on all active [phase]
conductors if local wiring rules allow for this variation of requirements )
B(mm)
760 50 mm
C(mm) D
20 mm Air inlet
16
E
Air outlet
10 mm