Mx Onda MX-VC2644 Manual De Usuario E Instalacion página 55

Placa vitrocerámica para encastrar con tres zonas de cocción

Idiomas disponibles

4. Once the tens of minutes of the timer have been

selected, allow 3 seconds to elapse without

touching any button and the minute units digit will

begin to flash, with the fingertip touch the power

level selector 4 and slide the finger left or right to

decrease or increase the minute units of the timer.

5. Once the time for automatic shutdown is set, the

display will show the chosen disconnect time and will

start the countdown, then the display will show the

remaining time for automatic shutdown.

Note: On the power indicator of the cooking zone

where the timer is set, an illuminated dot will appear

flashing, indicating that this cooking zone is timed.

6. Once the time for automatic switch-off has elapsed, the

corresponding cooking zone will automatically switch

off and display the indication "H".

The cooking zone that is not set with the timer will continue to

operate if it is turned on previously.

7. To cancel the timer, touch the selection button 2

corresponding to the timed cooking zone and then

touch the timer button 8, the remaining switch-off

time will disappear and the timer will be deactivated.

To change the automatic switch-off time of the timer, you must first cancel

the timer and set it again.

Setting the timer to turn off more than one cooking zone

The timer can be programmed for the cooking zones that are in operation, that

is, the three zones can be programmed, for example; with three different

disconnection times.

To program the timer for each zone, follow the procedure described in the

previous section. If there is more than one cooking zone operating and with the

timer function activated, the timer indicator will show the shortest time.

Note: On the power indicator of the cooking zone where the timer is set, an

illuminated dot will appear flashing, indicating that this cooking zone is timed.

If you want to check the switch-off time for a cooking zone, touch the selection

button for the desired cooking zone 2. The timer will indicate your set time.