Publicidad
Idiomas disponibles
Idiomas disponibles
Precautions
1. The ceramic hob must be installed by licensed electricians or qualified
technicians. Please never do the operation on your own.
2. The ceramic hob cannot be installed directly over a dishwasher,
refrigerator, freezer, washing machine or dryer, as moisture can damage
the electronic components of the ceramic hob.
3. The ceramic hob will be installed so that better heat radiation can be
guaranteed to improve its reliability.
4. The wall and the induced heating zone on the table top must withstand the
heat.
5. To avoid any damage, the hob must be heat resistant.
CONNECTION OF THE CERAMIC HOB TO THE ELECTRICITY SOCKET.
The ceramic hob must be installed by a licensed electrician or
suitably qualified technician.
Before connecting the ceramic hob to the mains, check that:
1. The electrical installation where the ceramic hob is to be connected must
be suitable for the power consumed by the ceramic hob.
2. The voltage must correspond to the nominal value specified in the
characteristics described in this manual.
3. The section of the power cables must withstand the current specified on
the nameplate.
To connect the ceramic hob to the mains socket, you must not use adapters,
reducers or branches, as these devices can become hot and cause a fire.
The power cable of the ceramic hob must not touch any part or area where it
acquires high temperatures and must be positioned so that the temperature will
not exceed 75˚C at any point.
Check with a licensed and qualified electrician for proper electrical installation.
Any modification to the electrical installation must only be carried out by a
licensed electrician.
The electrical connection of the ceramic hob must be carried out in accordance
with current regulations and protected by a single-pole magnetothermic or
automatic switch. The connection is shown below:
18
Publicidad
