Publicidad
Idiomas disponibles
Idiomas disponibles
Risk of injury to user. The power cord must
only be serviced by a Dremel Service Facility.
This product is not intended for use as a
dental drill, in human or veterinary medical
applications. Serious injury may result.
goggles or glasses with side shields. The op-
erator and other people in the work area
must wear eye protection in accordance with
ANSI Z87.1. Eye protection does not fit all op-
erators in the same way. Make sure the eye
protection chosen has side shields or pro-
vides protection from flying debris both from
the front and sides. The em ployer is respon-
sible for enforcing the use of eye protection
by the opera tor and
other people in the
work area. When re-
quired,
wear
head
pro tection in accor-
dance
with
ANSI
Z89.1
This hand-held, corded rotary tool is in-
tended for carving/engraving, routing, grind-
ing/sharpening, cutting, cleaning/polishing,
sanding, grout removal and drilling applica-
Model Number
Voltage rating
Amperage rating
Rated speed
Collet capacities
NOTE: For tool specifications refer to the nameplate on your tool.
1605A0014P 3100 202303.indd 7
Additional Safety Warnings
page heading
To reduce the risk of in-
jury, always wear safety
Intended Use
SAVE THESE INSTRUCTIONS
Specifications
Some dust created by
power sanding, sawing,
grinding, drilling, and other construction ac-
tivities contains chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals
are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
tions in soft wood, hard wood, laminates/
plastics,
steel,
aluminum/brass/copper,
shell/stone, ceramic, glass, and other mate-
rials.
3100
120V
1.2A
n 5,000-35,000/min
1/32", 1/16", 3/32", 1/8"
60Hz
7
4/5/23 7:04 AM
Publicidad
