Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting Tips ...
Problem
Display flashes
Unable to get into Settings
Control beeps or flashes
Fan noise
"Crackling" or "popping"
sound
Why is my range making a
"clicking" noise when using
my oven?
Oven light does not work
Oven racks are difficult to
slide
Steam from the vent
Water remaining on oven
floor after Steam Clean cycle
There is no steam during the
steam clean cycle
Oven will not steam clean
EasyWash oven tray will not
fit properly
"F— and a number or letter"
apear or flash in the display
32
Possible Cause
Power outage or surge
Oven control pads were not touched properly.
You forgot to enter a bake temperature or cleaning
time.
A convection fan may automatically turn on and off.
This is the sound of the metal heating and cooling
during both the cooking and cleaning functions.
Your range cycles the heating elements by turning
relays on and off to maintain the oven temperature.
Light bulb is loose or defective.
Pad operating light is broken.
lubrication
When using the ovens, it is normal to see steam
coming out of the oven vents. As the number of
racks or amount of food being cooked increases, the
amount of visible steam will increase.
This is normal.
This is normal.
Oven controls improperly set
Oven door is not closed.
EasyWash oven tray not installed correctly
You have a function error code.
What To Do
pressing the Cancel pad, setting the clock and resetting any
cooking function.
and held for 3 seconds.
See the Oven Controls section on how to set the oven
This is normal. While in use, the convection fan and
oven heaters will cycle on and off as needed to maintain
appropriate cooking conditions.
This is normal.
This is normal.
replace the bulb.
Call for service.
This is normal.
Remove any remaining water with a dry cloth or sponge.
Make sure you close the door to start steam clean cycle and
do not open the door during the cycle. See the Care and
Orient the EasyWash Oven Tray in the product so that the
integrated handle is facing forward towards the front of the
section for more details.
Press the Cancel pad. Allow the oven to cool and then put
the oven back into operation.
Press the Cancel pad. Disconnect all power to the oven for
error code repeats again, call for service.
49-2001192 Rev. 0
Publicidad
