Battery Test - Tool it PBT 550 Manual De Usuario

How to use:
1. Connect the red test clamp with battery anode and the black one with cathode, the
tester will power on automatically. Voltage battery below 7.0VDC can't be tested
properly, then press OK key to continue.
2. According to the tester, you can press UP/DOWN key to choose:

① Battery Test

② Cranking Test
③ Charging Test
④ Review Data
⑤ Print Data
⑥ Export Data
（1） Battery Test
Select the battery test and press OK key to continue:
 Battery Type: select your battery type, usually is "Regular Flooded"

Input testing standard: the standard which you can see the front of the
battery ,such as CCA、BCI、DIN. If you can't find any info about the standard,
you can choose GB standard. Choose GB standards would lead little tolerance.

Input rated capacity: you can see the starting current standards in front of the
battery .Such as BCI/300A.

Then press OK key to start testing.
Note：
For power loss battery (such as a vehicle for a long time on hold, the battery is not
charged in time; forget to close the lights, the doors resulting in serious loss of battery
electric vehicle and can not be started, etc.), in the actual testing process may also be
prompted to "Please replace the battery," for such batteries, please consult the battery
manufacturers, and then tested.
PBT 550 battery conductance tester User Manual
EN -
3