Descargar Imprimir esta página

auronic AU3263 Manual De Instrucciones página 38

Aire acondicionado móvil

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 99
3.3 Installing the window seal for an opening window
The product must be vented to the outside to allow exhaust air to escape from the space
coming out of the product containing waste heat and moisture.
Do not replace or extend the exhaust hose, this will result in reduced efficiency and worse,
cause the product to shut down due to insufficient back pressure.
38
1.
Connect the hose connector to one end of the exhaust hose.
4.
Close your window to hold the window seal in place. The window
seal should stay firmly in place. If necessary, secure the window seal
with duct tape. It is recommended to seal the gap between the hose
connector and the sides of the window for maximum efficiency.
5. Attach the connector of the hose to the product's exhaust vent.
2.
Connect the connector to the other end of the
exhaust hose.
3.
Extend the adjustable window seal along the
length of your window. Connect the exhaust hose to
the window seal.

Publicidad

loading