Publicidad
Idiomas disponibles
Idiomas disponibles
Note
◊
Sleep mode can be activated in cooling and heat mode.
◊
In cooling mode: After 1 hour, the preset temperature is increased by 1°C. After another hour,
the preset temperature is increased again by 1°C.
◊
In heat mode: After 1 hour, the preset temperature is reduced by 2°C. After another hour, the
preset temperature is lowered again by 2°C. Then the temperature will be kept constant
for 10 hours and all indicators will go dark. The fan speed will switch to a low speed for quiet
operation and cannot be selected.
3.12 Timer setting
The timer can be operated in two ways:
Turning off after a specified time when the product is on.
•
Turning on after a specified time when the product is off.
•
3.12.1 Turning off
1.
Press TIMER to turn on the timer function.
2. Press UP/DOWN repeatedly to set the timer.
3. The product will turn off at the desired time.
3.12.2 Turning on
1.
Press TIMER to turn on the timer function.
2. Press UP/DOWN repeatedly to set the timer.
3. The product will turn on at the desired time.
3.12.3 Cancel
You can cancel the timer in 2 different ways:
Press UP/DOWN repeatedly until the display shows '00'.
•
Press POWER to cancel the timer setting.
•
Note
◊
You can set the timer from 1 to 24 hours.
3.13 Automatic defrosting
At low room temperature, frost may form on the evaporator during operation. The product then
begins to defrost automatically and the POWER indicator flashes.
The defrost cycle is as follows:
When the product operates in cooling mode or dehumidification mode, the ambient
•
temperature sensor detects that the temperature of the evaporator coil is below -1°C. When
the compressor has stopped working for 10 minutes or the coil temperature has risen to 7°C,
the product restarts in cooling mode.
42
Publicidad
