Publicidad
Idiomas disponibles
Idiomas disponibles
The product makes noise/
noise.
Error code E0 is displayed.
Error code E1 is displayed.
Error code E2 is displayed.
Error code Ft is displayed.
5. MAINTENANCE AND CLEANING
5.1 Cleaning the air filter (every two weeks)
Dust collects on the filter and restricts air flow. The restricted air flow reduces the efficiency of
the system and if it becomes clogged, the product may be damaged.
The air filter should be cleaned regularly. The air filter is removable for easy cleaning. Do not use
the product without an air filter or the evaporator may become contaminated.
1.
Press POWER to turn off the product and unplug the product.
2. Remove the filter mesh from the product.
3. Use a vacuum cleaner to suck dust from the filter.
4. Turn the filter over and rinse the air filter under running
water. Run water through the filter in the opposite direction
of the air flow.
5. Set aside and allow the filter to air dry completely before
reinstalling.
The product is not standing
firmly on a flat surface.
Parts are loose or vibrating.
Refrigerant is flowing.
Communication errors
between the main board and
the display board.
Ambient temperature sensor
malfunction.
Boiler temperature sensor
malfunction.
The water tank is full.
Place the product on a
horizontal and firm surface.
Secure the parts securely.
This is normal. There is noise
coming from the flowing
refrigerant.
Check if the display board
wiring harness is damaged.
Contact customer service if
damaged.
Check if the connector
is damaged or dirty.
Contact customer service if
damaged. Clean the sensor if
it is dirty.
Check if the connector
is damaged or dirty.
Contact customer service if
damaged. Clean the sensor if
it is dirty.
Empty the water tank by
removing the rubber stopper.
English
45
Publicidad
