Publicidad
Idiomas disponibles
Idiomas disponibles
The information provided in this section of the manual
is provided in good faith and believed to be accurate
at the time the document was created. However, no
warranty, expressed or implied, is given. It is the buyer's
responsibility to ensure that its activities comply with the
applicable regulations.
Battery Pack
BATTERY TYPE
The SCD10 operates on a 12V Max battery pack.
STORAGE RECOMMENDATIONS
1. The best storage place is one that is cool and dry
away from direct sunlight and excess heat or cold.
For optimum battery performance and life, store
battery packs at room temperature when not in use.
2. For long storage, it is recommended to store a fully
charged battery pack in a cool, dry place out of the
charger for optimal results.
NOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the
labels on the charger and the battery pack may show the
following pictographs:
Read instruction manual before
use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 10 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for the
environment.
Charge STANLEY battery packs only with
designated STANLEY chargers. Charging
SC101
battery packs other than the designated
STANLEY batteries with a STANLEY charger
may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
PACKAGE CONTENTS
The package contains:
1 Drill/driver
1 Charger
2 Batteries (D2) or 1 Battery (D1)
1 Instruction manual
NOTE: Battery packs and chargers are not included with
N-models.
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
DESCRIPTION (FIG. A)
WARNING: Never modify the power tool
or any part of it. Damage or personal injury
could result.
1. Variable speed trigger switch
2. Forward/reverse button
English (original instruction)
33
Publicidad
