Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Information
Reaction forces depend on tool setting and
joint characteristics. The ability to bear re-
action forces depends on the operator's
strength and posture. Adapt the torque set-
ting to the operator's strength and posture
and use a torque arm or reaction bar if the
torque is too high.
• Use dust extraction system or mouth protection
mask in dusty environments.
Country of origin
Please refer to the information on the product la-
bel.
Spare parts
Parts without ordering number are not delivered
separately for technical reasons.
The use of other than genuine Atlas Copco re-
placement parts may result in decreased tool per-
formance and increased maintenance and may, at
the company option, invalidate all warranties.
Warranty
Contact the Atlas Copco sales representative
within your area to claim a product. Warranty will
only be approved if the product has been installed,
operated and overhauled according to the Operat-
ing Instructions.
Please also see the delivery conditions applied by
the local Atlas Copco company.
ServAid
ServAid is a utility for providing updated product
information concerning:
- Safety instructions
- Installation, Operation and Service instructions
- Exploded views
ServAid facilitates the ordering process of spare
parts, service tools and accessories for the product
of your choice. It is continuously updated with in-
formation of new and redesigned products.
You can use ServAid to present content in a spe-
cific language, provided that translations are avail-
able, and to display information about obsolete
products. ServAid offers an advanced search func-
tionality of our entire product range.
ServAid is available on DVD and on the web:
http://servaidweb.atlascopco.com
8
© Atlas Copco Industrial Technique AB - 9836 1401 04
For further information contact your Atlas Copco
sales representative or e-mail us at:
servaid.support@se.atlascopco.com
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products
sold by Atlas Copco.
For more information, consult the website
http://www.atlascopco.com/.
Choose Products - Safety Data Sheets, and fol-
low the instructions on the page.
Decommissioning
Recycling instruction
When a product has served its purpose it has to be
recycled properly. Dismantle the product and recy-
cle the components in accordance with local legis-
lation.
Batteries shall be taken care of by your national
battery recovery organization.
Technical data
Technical data
Noise and vibration emission
Noise (in accordance
with ISO15744)
Sound pressure level
Sound power level
Uncertainty
Vibration total value,
valid from 2010
(3-axes value in accor-
dance with
ISO28927-2)
Vibration value
Uncertainty
Noise and Vibration Declaration
Statement
These declared values were obtained by laboratory
type testing in accordance with the stated standards
and are suitable for comparison with the declared
values of other tools tested in accordance with the
LMP51 H
dBA
78
-
3
2
m/s
<2.5
-
Publicidad
