Kasanova SJ-2023 Manual De Instrucciones página 11

CORDLESS VACUUM SEALER
When vacuum packaging powdery items like flour, it's best to use their original packaging inside of the vacuum bags. The fine
powder could get sucked into the machine and cause enough damage to shorten the life of the sealer.
Preparation Hints for Liquids :
Before you vacuum package liquid such as soup stock, pre-freeze in a casserole dish, loaf pan or ice cube tray until solid. Remove
frozen liquid from pan and vacuum package in the vacuum bags. You can then stack in the freezer. When you're ready to use, just
cut corner of bag and place in either a microwave dish or drop into water at a low simmer, below 170°F (75°C).
OPERATION INSTRUCTIONS
Use a vacuum bag to vacuum packaging
1. Put the items in a dedicated vacuum bag.
2. Clean up the vacuum bag and ensure that there is no dust or fold at the mouth of the bag.
3. Put the opening of the vacuum bag into the machine vacuum chamber (generally 3-5mm beyond the vacuum indoor wall) to
ensure that the bag is not leaked. As shown in Figure 1.
4. Close the upper cover and press the two ends of the upper cover with the palm of the hand, and hear the crisp lock sound, as
shown in Figure 2;
5. Check the leading button " " and select "Dry" or "Moist" according to actual needs.
6. Then press "Dry" or "Moist", the machine will automatically complete the vacuum and seal, as shown in Figure 3;
7. After the vacuum&sealing is completed, press the release button on both sides to open the upper cover and remove the vacuum
bag, as shown in Figure 4.
Figure1
Figure3
Use a vacuum bag to vacuum packaging
1. Wipe the vacuum container and lid and keep them dry.
2. Put the items in a vacuum container, don't put it too full, and cover the lid.
3. Insert the two ends of the vacuum tube into the external vacuum port of the machine, and the pumping mouth on the vacuum
container or the lid to ensure that the vacuum container is in a sealed state.As shown in Figure 5.
4. Then press the two ends of the upper cover with the palm of your hand, hear the crisp lock sound, and press "Manual". When
you reach enough vacuum pressure, letting go of the machine will automatically stop working.
5. Immediately after the vacuum is completed, remove the vacuum tube.
Open the vacuum container
Open the vacuum container. Press the "deflection" silicone button on the lid (the operation method of different containers is
different).
Figure2
Figure4
11