PUFF PFEN044 Manual De Instalación Y Mantenimiento página 28

9.1 • Check the appliance and the entire
installation straight after connecting.
Check in particular:
• there are no traces of the protective film on
the outside walls and the oven is empty;
• all the vents are clear;
• the connections are made as required and
instructed in this handbook;
• all the safety requirements of the current
standards, laws and directives are met;
• there is no leakage from the gas and water
connections;
• water drainage and flue gas extraction are
clear.
• Apply the adhesive with the warning signal
against the scalding danger at a height
from the ground of 1.6m.
9 • COMMISSIONING AND TESTING
90041240rev00
EN - 28 -
9.2 • Now proceed to light the oven as directed
in the user manual, checking the smooth
ignition of the burner.
9.3 • You should moreover check that the
silicone joints and sleeves of the water
circuit (oven vent, oven outlet, drip tray) do
not leak.
9.4 • Carefully refit the side and/or back that
was removed for the above work.
9.5 • The test report must be completed in all its
parts, registered on the "service-planner"
technical portal and submitted to the
Client, who must sign it for acceptance.
This operation automatically starts the
oven warranty period.