Descargar Imprimir esta página

Coccolle Lyra Manual Del Usuario página 15

Silla de coche giratoria isize

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
EN
15. Headrest adjustment lever
16. Top-tether
17. Connective band for straps
18. Shoulder straps
19. Harness strap hook
20. Shoulder strap adjusting belt
21. Isofix connectors
3. Product features
1. This is a baby car seat equipped with a restraining system.
2. The product requires safety belt and isofix system to be properly installed in a
vehicle.
3. This product can be adjusted in several leaning positions and at different
heights, can be rotated 360 degrees and is suitable for both children that can
already master sitting and to small babies/toddlers that need a sleeping position.
4. This product is suitable for children with height of 40-150 cm.
4. Usage of the product
4.1. Car seat installation in the vehicle
Start by mounting the car seat on the seat equipped with 3-point seatbelt.
Attention: if your car is equipped with isofix system we recommend using it
because it is much safer and more comfortable than using other mounting
methods.
4.2. Adjusting the height of the headrest
You can adjust the height of the headrest in 12 positions based on your child's
height. As figure 4.2. indicates, lift the height adjusting lever, then pull upwards
to the correct position according to the child's height. Lift the lever and push
downward in order to put the headrest in a lower position.
Important: after the headrest has reached the desired position, make sure it has
been fixed in the chosen position by moving it up and down.
4.3. Checking the height of the shoulder straps
Make sure that the shoulder straps are adjusted to a proper height for your child.
The straps should go through the holes that are nearest to your child's
shoulders or above according to image 4.3. The height of the shoulder straps
automatically adjusts with the headrest. During the usage of the car seat make
sure that these two components are adjusted according to your child's height.
4.4. Using the safety belt buckle
Step1: connect the two tongue buckles.
Step2: insert the tongues into the buckle until you hear the "click" sound. Try to
gently pull them out so you can make sure they are locked tightly.
Step3: to open the buckle, press the central red button. The buckle tongues will
pop out and then you can open the safety belt.
15

Publicidad

loading