Tornado TORRENT 43 Manual De Operaciones Y Mantenimiento página 24

CLEANING
Start filter cleaning.
• Switch off the sweeper, pull out the ignition key.
• Raise the filter cover until this engages in the backplate.( Fig.1)
• Hold the filter holder firmly and undo the filter lock on the left and right.
(Fig.2)
• Slowly release the filter holder and filter (Fig.3)
• Take the filter out of the machine. (Fig.4)
• Clean or replace as required.
• As required, carefully blow out with compressed air Insert filter again.
Note: The filter may be damaged by blowing the filter material with too much
pressure.
Fig.1
Fig.3
Fig.2
Fig.4
22