Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance Work/Maintenance Table
Note: The following maintenance work must be carried out by instructed and
authorized specialist staff at the set intervals.
Check machine for damage and functional faults and remedy as
Check the battery charge; charge battery as appropriate.
Check sweeping roller & sweeping roller housing for damage,
for foreign bodies and for wear; remove any foreign bodies /
clean or replace the sweeping roller.
Check side brushes for foreign bodies, straps etc.; remove/
Check side brushes setting; readjust or replace side brushes as
Check the condition of the dust filter; clean as appropriate.
Check the charge of the battery before each usage.
Check the sealing rubber in the sweeping roller area for wear
and damage; replace as appropriate.
Check dust filter for damage; replace as appropriate
Functional test of the entire machine
CAUTION: In the event that damage to the machine is
discovered, it must not be used until the damage has been
remedied by specialist staff.
The motor(s) need(s) to overrun for several seconds after
being shut off. In this time, you must keep clear of the drive
area
CAUTION ! • Allow the equipment to cool down sufficiently
before all maintenance and repair work
• Unplug the charger from the socket.
•Disconnect the plus terminal from the battery.
Activity
appropriate.
Empty the refuse container.
clean as appropriate.
appropriate
MAINTENANCE
Daily Weekly Every 50
•
•
•
•
•
•
•
•
Interval
hours
•
•
•
33
Publicidad
