Tornado TORRENT 43 Manual De Operaciones Y Mantenimiento página 31

Readjusting the Bowden cable is required if the driving force of the machine is no
longer sufficient.
• Put ignition key into the "0" position and pull out.
• Undo the lock nut.
• Setting/readjusting the Bowden cable
• Screw the lock nut tightly.
Setting/Changing Side Brush Bowden Cable
Readjusting the Bowden cable is required if the side brush no longer folds in
completely.
Folding out is done with springs
• Put ignition key into the " 0 " position and remove key.
• Undo the lock nut under the drive bar cover plate.
• Set/readjust the Bowden cable.
• Screw the lock nut tightly
CLEANING
29