Publicidad
Idiomas disponibles
Idiomas disponibles
Transport
Note: Do not kink any Bowden cables!
• Switch off sweeper and pull out the ignition key.
• Fold the side brushes upwards
• Fasten the wheels of the machine with chocks.
• Fasten the machine with tensioning belts or ropes.
• While transporting in vehicles or trailers, the machine has to be secured,
according to the relevant applicable guidelines, against sliding and tipping.
• Two fastening areas for belts:
a) Machine vertically fastened (fastened to the floor as illustrated)
b) Machine horizontally fastened (fastened to the wall as illustrated)
Storage:
Note: If it is stopped for a long period, the battery must charge at intervals of
approximately 2 months so this is not damaged by a deep discharge.
• Set down the sweeper onto a level, dry and protected surface.
• Put ignition key into the " 0 " position and remove key.
• Secure sweeper against rolling away.
• Raise sweeping roller. To do this, adjust the level to the lowest position and stop.
• Raise the side brushes.
• Clean the dust filter.
• Empty the refuse container.
TRANSPORT AND STORAGE
DANGER! Risk of crushing! Observe the weight of the
machine!
31
Publicidad
