VALBERG CNF 327 E X742C Instrucciones De Uso página 22

C
Useful information
Troubleshooting
CAUTION:
Before troubleshooting, disconnect the power supply.
Only a qualified electrician of competent person must do
the troubleshooting that is not in this manual.
IMPORTANT:
There are some sounds during normal use (compressor,
refrigerant circulation).
Problem
Appliance does not work
Appliance freezes or
cools too much
The food is not frozen
enough.
Possible cause
Temperature regulation knob is set
at coldest
Mains plug is not plugged in or is
loose
Fuse has blown or is defective
Socket is defective
Temperature is set too cold or the
appliance runs at coldest.
Temperature is not properly
adjusted.
Door was open for an extended
period.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
The appliance is near a heat source.
21
Set the knob at other switch on the
appliance.
Insert mains plug.
Check fuse, replace if necessary.
Mains malfunctions are to be
corrected by an electrician.
Turn the temperature regulator to a
warmer setting temporarily.
Please look in the initial Temperature
Setting section.
Open the door only as long as
necessary.
Turn the temperature regulation to a
colder setting temporarily.
Please look in the installation
location section.
EN
Solution