Publicidad
Idiomas disponibles
Idiomas disponibles
Contents
Symbols used in this manual . . . . . . . . . 12
Symbols on the device . . . . . . . . . . . . . 12
Important safety information . . . . . . . . . 12
Noise and vibration . . . . . . . . . . . . . . . . 13
Technical data . . . . . . . . . . . . . . . . . . . . 14
Overview . . . . . . . . . . . . . . . . . . . . . . . . 15
Instructions for use . . . . . . . . . . . . . . . . 16
Maintenance and care . . . . . . . . . . . . . . 18
Disposal information . . . . . . . . . . . . . . . 19
Declaration of Conformity . . . . . . . . 20
Declaration of Conformity . . . . . . . . 20
Exemption from liability . . . . . . . . . . . . . 20
Symbols used in this manual
WARNING!
Denotes impending danger. Non-obser
vance of this warning may result in death or
extremely severe injuries.
CAUTION!
Denotes a potentially dangerous situation.
Non-observance of this warning may result
in injury or damage to property.
NOTE
Denotes hints on use and important infor
mation.
Symbols on the device
Before switching on the power tool,
read the operating manual!
Wear protective goggles!
Disposal information for the old tool
(see page 19)!
12
Important safety information
Read before using the power tool and act
accordingly:
these operating instructions,
–
the "General safety instructions" on
–
the handling of power tools in the enclosed
booklet (leaflet no.: 315.915),
the currently valid site rules and the regula
–
tions for the prevention of accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations. Never
theless, when in use, the power tool may
pose a danger to life and limb of the user or
a third party, or the power tool or other items
could be damaged. The power tool may be
operated only
-
for its intended use,
–
in perfect working order.
–
Faults which compromise safety must be
repaired immediately.
Intended use
The KNE 16 18-EC cordless nibbler is
intended
– for commercial use in industry and trade,
-
– for cutting, separating and trimming sheet
metal and plastics that can be cut,
– for straight cuts, cutouts and narrow
curves.
Safety instructions
Read all safety notices and instructions.
Failure to comply with the safety notices and
instructions may result in electric shock, fire
and/or serious injuries . Keep all safety
notices and instructions in a safe place for
future reference.
Make sure that the machine is switched
off when inserting the battery pack.
Remove chips and the like only when the
machine is at a standstill.
Secure the workpiece against
displacement or rotation (e.g. by
fastening with clamps).
Always wear protective goggles, work
gloves and sturdy shoes when working
with your machine.
Do not put your hands in the cutting area.
WARNING!
WARNING!
KNE 16 18-EC
-
-
Publicidad
