Panasonic GP-UH532C Manual De Instrucciones página 21

Precautions for installation
Cautions:
• ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/
CSA 60950-1).
The installation should comply with local electrical code.
This product is designed to be used indoors.
This product is not operable outdoors.
Do not expose this product to direct sunlight for hours and do not install the product near a heater or an air conditioner. It may
cause a drop or malfunction. Keep this product away from water and moisture.
Procure a tripod separately.
The tripod to mount the camera head is not supplied. Prepare it according to the area where the camera is to be installed.
Keep the CCU at least 10 cm away from the surrounding wall.
If the CCU is installed contacting the wall, heat release is blocked and it may result in malfunction.
Avoid moist or dusty places to install this system.
Otherwise, lifetime of the internal parts may be shortened.
Avoid installing or using this system in the following locations:
• Locations where it may get wet from rain or water splash
• Locations where a chemical agent is used such as a swimming pool
• Locations subject to humidity, dust, steam and oil smoke
• Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated
• Locations where corrosive gas is produced
• Locations where the temperature is not within 0 °C to 40 °C {32 °F to 104 °F}
• Locations subject to vibrations (This product is not designed for on-vehicle use.)
• Locations where the temperature may rapidly change such as the peripheral areas of the air outlets of air conditioners or
doors facing outside
Radio interference
Images may be distorted near a transmitting antenna for TV or radio broadcasting signals or electric or magnetic fields (for
example, caused by a motor and a transformer).
Be sure to remove this product if it is not in use.
21