Panasonic GP-UH532C Manual De Instrucciones página 23

How to mount lens
Important:
• A lens whose projection length of the lens mount section is 4 mm {5/32 inches} or
less shall be used.
• The recommended lens aperture ranges from F4.0 to F16. Selection of less than F4.0
of the lens aperture may result in image blurring.
• When a zoom lens is used, focus adjustment method varies with the lens. For further
information, refer to the operating instructions for the lens to be used.
• When the lens is removed, be sure to put the cap on the lens mount section of the
camera head.
Step 1
Remove the cap from the lens mount section of the camera
head.
Important:
• Check to see whether the surface of the optical filter is
clean before mounting a lens. If the surface is dirty, use
a blower brush for general camera to remove dust.
Supported lenses (reference/as of July, 2017)
Manufacturer
FUJIFILM
Product name
3CCD/CMOS Camera Lens
Step 2
Turn a C-mount lens clockwise to engage the lens with the
lens mount section.
Model
TF4XA-1
C mount:
4 mm {5/32 inches}
or less
23