Publicidad
Idiomas disponibles
Idiomas disponibles
installation guide
STEP 5
Uncoil input Power Cord (connected to
Control Box's power port) and plug into
Power Supply .
STEP 6
Uncoil the Power Cord and connect to the
Power Supply . Place Power Supply on the
ground and extend from the base . Ensure
that the Power Supply and all attached
cords are directed toward the desired surge
protector .
STEP 7
Carefully flip the base over . Important: Two people are required to
move the bed base . Do not drag across the floor . Do not rest frame
on its side, excessive pressure may damage the legs .
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
STEP 8
Plug the power cord into a power source .
A surge protector is recommended.
STEP 9
Install the remote batteries and test remote functions to verify
proper setup before placing mattress on base . Return the base to
a flat position before placing the mattress on top .
STEP 10
To install the mattress retainer bars, insert the ends of the bars into
the holes at the foot of the platform .
Setup is now complete!
9
Publicidad
