Serta Motion Renew Manual Del Propietário página 15

syncing two bases (optional)
A sync cord is included with the base . Not available on Queen, Full or King/Cal King size bases .
The sync cord connects the two control boxes to a single remote for the synchronization of two bases .
STEP 1
Unplug bases from power source .
STEP 2
Plug the male ends of the sync cord into the Multifunction port of each
control box .
STEP 3
Plug bases back into the power source . The light under the bed will
begin to flash, indicating that it is in pairing mode .
Control
Box 1
Control
Box 2
Sync Cord
STEP 4
Press and hold down the PAIR button on
the back of the remote . The button will
flash to indicate the pairing is completed .
The PAIR button will stop flashing and the
underbed light will turn off . The remote
control can now operate the base normally .
PAIR button
13