Serta Motion Renew Manual Del Propietário página 14

remote control
REMOTE PAIRING
The original remote that comes in the box is already paired to the
adjustable base . No further action is required . In the event that
the remote is not paired with the base, follow the steps below .
STEP 1
Unplug the Power Cord from your power outlet . Wait 1 minute, then plug
it back in to your power outlet . Perform Step 2 within 10 seconds, while
the control box light is flashing .
Power Supply
STEP 2
Press and hold the PAIR button on the
back of the remote . The PAIR button
will illuminate and start to flash . When
the PAIR button stops flashing, the LED
light on the control box will stop flashing .
Release the PAIR button .
STEP 3
The remote is now paired to the adjustable base . Test all remote
functions . If the remote buttons do not impact the adjustable base
movements, please repeat the process again .
12
Power Cord
PAIR button
CHILD LOCK
Activate Child Lock
To activate Child Lock, double click the Child
Lock button on the back of the remote .
The remote is now in Child Lock. Pressing any
buttons while in Child Lock will yield no move-
ment to your adjustable base.
Note: A lock icon on the remote LCD screen will
light up green when Child Lock is active.
Deactivate Child Lock
To deactivate Child Lock, double click the Child
Lock button on the back of the remote .
The remote is no longer in Child Lock. The re-
mote and adjustable base will work normally.
Note: An open lock icon will appear on the re-
mote LCD screen when Child Lock is inactive.
Click 2x
Click 2x