Serta Motion Renew Manual Del Propietário página 18

headboard bracket installation guide (optional)
Headboard Brackets are an optional accessory and are not included .
A 9/16" & 1/2" socket and crescent wrench are necessary to complete installation .
STEP 1
Attach the Headboard Bracket .
a . Align the hole in the bracket to
the brass sleeve into which the
leg threads (a) . Hold the bracket
in place and screw the leg into
the base until it is snug . DO NOT
OVERTIGHTEN . Too much force
may cause the leg to spin freely .
b . Align the tab with the hole in the
frame (b) and use a short bolt
and nut to secure the bracket .
Make sure the bolt is tight .
STEP 2
Attach the plastic spacer and T-Bracket .
a . Measure the distance between the mounting holes on the
headboard and install the T-Bracket to accommodate the
headboard .
b . To install the T-Bracket, slide the T-Bracket through the end of the
headboard bracket . Align the flat side of the T-Bracket plate to the
mounting holes on the headboard .
16
c . Secure T-Bracket in place by inserting two short screws through
top of bracket . Use hex key to tighten screws .
b
a
STEP 3
Connect your headboard to the attachment
plate using the remaining long screws or
hardware that came with your headboard .
The heads of the bolts will face outward .
Use hex key to tighten bolts .