Stihl 4910-550-3400 Manual De Instrucciones página 8

Transporting the Rotating
Roller Brush
► When transporting the rotating roller
brush in a vehicle, secure and posi‐
tion the it to prevent turnover, impact
and damage.
Storing the Rotating Roller
Brush
To store the rotating roller brush:
► Clean the rotating roller brush.
► Secure and position the rotating roller
brush to prevent turnover, impact and
damage.
► Store the rotating roller brush indoors
in a dry and secure location, out of
the reach of children and other unau‐
thorized persons.
► Ensure that bristles are not bent or
deformed during storage.
NOTICE
■ Freezing temperatures can damage
components of the rotating roller
brush. STIHL recommends storing
the rotating roller brush indoors in a
dry room where it is protected from
freezing temperatures. Make sure all
water is eliminated from the rotating
roller brush before storing.
Cleaning the Rotating Roller
Brush
To clean the rotating roller brush:
► Clean the rotating roller brush with a
damp cloth.
To clean the roller brushes:
► Flush the bristles with clean water to
remove any remaining dirt, sand or
other debris from the bristles.
► Test the rotating roller brush at an
inconspicuous area on the surface
8
being cleaned, and check, that the
surface will be not damaged.
To clean the nozzle:
► Shut off the pressure washer and
squeeze the spray gun trigger to
relieve system pressure.
► Lock the spray gun trigger.
► Disconnect the spray attachment
from the rotating roller brush.
► Remove the bayonet style connector
with the inserted nozzle.
► Flush the bayonet style connector
and nozzle with clean water and use
the cleaning pin from your pressure
washer to remove any remaining deb‐
ris from the orifice.
NOTICE
■ Dirt, sand or other debris in the bris‐
tles of the roller brushes can damage
the surface of the object being
cleaned. Keep bristles clean to help
prevent scratches and other property
damage.
■ Nozzle orifices are extremely small
and may become clogged with for‐
eign material, such as dirt. Clean the
nozzle immediately if they become
partially clogged.
Replacing the Brush Rollers
To replace the brush rollers,
► Squeeze the clip.
► Pull the brush rollers off the shaft.
► Mount the new brush rollers to the
rotating roller brush.
Specifications
– Weight: 2.7 lbs. (1.2 kg)
– Height: 13.4 in. (340 mm)
– Maximum Pressure: 2610 psi (18
MPa / 180 bar)
– Maximum water temperature: 104 °F
(40 °C)
0457-367-0067-A. VA1.L23.
I: