Publicidad
Idiomas disponibles
Idiomas disponibles
3.2.
Electrical Safety
•
Follow the instructions for the charger.
3.3.
Power Tool Use Safety
•
Do not overload the tool, select suitable tool to work make you safe and high efficiency.
•
Do not use the tool if the switch doesn't work properly. Tool should be repaired if the switch doesn't work.
•
Store the tool away from the children, do not put tool to non-training person operate.
•
Maintain tools. Always check tool, moving parts, any damage parts are all can cause injury, the correct maintenance of the tool can avoid injury.
•
Keep blade sharp and clean. Sharp and clean blade can be easily controlled and not jams.
•
Read manual before using the tool, select suitable tools and right accessories to avoid injury.
3.4.
Battery-Operated Tool Precautions
•
Inappropriate usage will cause leakage of liquid. If your body is splashed by the liquid, please flush by clean water. Must see a doctor if liquid touches eyes. Liquid of
battery will canker or burn.
3.5.
Personal safety
•
Be awake, alert and pay close attention during the operation of power tools. Do not operate the power tool when you are tired, intoxicated or on medication.
Falling asleep or losing consciousness during in the operation of the power tool can result in serious personal injury.
•
Use personal protective equipment. Always wear goggles and safety equipment such as dust masks, non-slip safety shoes, hard hats, hearing protection, etc.
Wearing safety gear in appropriate conditions can reduce personal injury.
•
Inserting the plug when the tool is plugged in or when it is turned on can be dangerous.
•
Remove all adjustment keys or wrenches before the power tool is on. A wrench or key left on the moving parts of the power tool can cause personal injury.
•
Do not overextend your reach and lose balance. Always pay attention to your foothold and body balance. This allows for good control of the power tool especially
during unexpected situations.
•
Dress properly. Do not wear loose clothing or jewelry. Keep clothing, gloves and hair away from moving parts. Wearing loose clothes, accessories, or long hair may
get caught in moving parts.
4.
Special Safety Instructions
4.1.
Pruning shear special safety instruction
•
Keep anybody away at least 1.5m from the blade, do not move cutting parts at blade working.
Keep any part of your body away from the blade at least 15cm. Carefully operate the equipment can avoid injury.
•
Move the tool at blade not moving. Protection guard is must at storage the tool. Protect blade to reduce damage.
Pag. 19 di 164
Publicidad
