Publicidad
Idiomas disponibles
Idiomas disponibles
•
As a result, the blade must be checked frequently during the initial period of use to determine the appropriate grinding time (check every 15 minutes and you will
quickly calculate)
14.2.
Greasing of the blades
The greasing of the blades has sto be repeated each 2-3 working days to guarantee the correct performance of the tool and to avoid the seize of the blades.
•
Open the blades of the pruner.
•
Turn off the tool.
•
Apply the grease between the moving blade and the fix blade (see the picture below).
•
Turn on the pruner and pull the trigger sometimes to get the grease through the blades.
•
Clean the blades from the grease leftover.
14.3.
Disassembly and grease
General maintenance, cleaning, lubrication and blade replacement requires some disassembly and assembly of your pruner.
It is recommended to grease the gears each 3-4 working days to guarantee the correct operating life of the tool.
Pag. 27 de 164
Publicidad
