Grundfos CMBE 3-93 Instrucciones De Instalación Y Operación página 5

Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages
and some jurisdictions do not allow limit actions
on how long implied warranties may last.
Therefore, the above limitations or exclusions
may not apply to you. This warranty gives you
specific legal rights and you may also have other
rights which vary from jurisdiction to jurisdiction.
2. General information
This appliance can be used by children
aged from 8 years and above and per-
sons with reduced physical, sensory or
mental capabilities or lack of experi-
ence and knowledge if they have been
given supervision or instruction con-
cerning use of the appliance in a safe
way and understand the hazards in-
volved.
Children shall not play with the appli-
ance. Cleaning and user maintenance
shall not be made by children without
supervision.
Read this document before you install
the product. Installation and operation
must comply with local regulations and
accepted codes of good practice.
2.1 Hazard statements
The symbols and hazard statements below may
appear in Grundfos installation and operating
instructions, safety instructions and service
instructions.
DANGER
Indicates a hazardous situation which,
if not avoided, will result in death or se-
rious personal injury.
WARNING
Indicates a hazardous situation which,
if not avoided, could result in death or
serious personal injury.
CAUTION
Indicates a hazardous situation which,
if not avoided, could result in minor or
moderate personal injury.
The hazard statements are structured in the
following way:
SIGNAL WORD
Description of the hazard
Consequence of ignoring the warning
• Action to avoid the hazard.
2.2 Notes
The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Observe these instructions for explo-
sion-proof products.
A blue or grey circle with a white
graphical symbol indicates that an ac-
tion must be taken.
A red or grey circle with a diagonal bar,
possibly with a black graphical symbol,
indicates that an action must not be
taken or must be stopped.
If these instructions are not observed,
it may result in malfunction or damage
to the equipment.
Tips and advice that make the work
easier.
5